U.S.:       (316) 828-5110
    Europe:  +39-035-2273411
    Asia:       +81-3-5435-8560 		KG-TOWER SOFTWARE
FAQ
SEARCH
Home Our Company Products and Services Applications Literature Data Sheets
REQUEST DATA SHEET

Koch-Glitsch Contact Information

Lube Oil Vent Mist Eliminator Data Sheet
To ensure design accuracy, please provide as much information as possible.

Required fields are bold
Contact Information
Name
Title
Company
Address 1
Address 2
City
State/Province
Country
Date
Date Quotation Required
Phone
Fax
Email
End User
Location
Proposal No.
Customer Ref.
Date Inquiry
Date Proposal
Budget
Firm
Shipment desired by

The information we request in the boxes below will help us return a design specific to your application. Please provide as much detail as possible.

A. Gas max. design flow rate:
Actual ft³/min (m3/min)
Standard ft³/min (m3/min)
Temperature °F
Elevation in ft. (m)
Atmospheric (Barometric) pressure
B. Maximum differential pressure (across elements) that we can add to the exhaust back pressure. If there is an exhaust fan or blower with a damper on the exhaust line or a recycle line the max pressure drop allowed can be estimated by noting the reservoir static pressure at normal operating conditions (usually a negative value in inches of water column) then noting it again with the damper fully open or the recycle line closed. The difference in the two static pressures (with a factor of safety applied) is the max additional pressure drop allowed.

Max pressure drop allowed in. W.C.
C. Maximum reservoir static pressure in. W.C.
D. Max. gas temperature (of gas at the mist eliminator or exhaust, in °F)
E. Gas density at the operating conditions (or we will use atmospheric air density at temperature and altitude given above) in lb/ft³ (kg/m3)
F. Exhaust vent size (Pipe size and schedule so that we can include matching 150 lb. ANSI flange mating dimensions on the inlet and exhaust nozzles of the mist eliminator)
Pipe Schedule
Flange Rating
G. Estimate of amount of liquid mist in the vapor (Amount of make-up oil is one way of estimating).
Amount of make-up oil, lb/day
Amount of make-up oil, gal/day
Liquid density at operating conditions in lb/ft³ (kg/m3)
Existing fan/blower to be used: Yes No
Please include the name plate identification data of fan and motor
Fan/blower to be supplied with mist eliminator, by Koch Yes No
Location of exhaust fan/blower preferred Before After the mist eliminator
Turbine manufacturer
Model name/no.
Size
kW/MW, in Bhp

© Copyright 2008 Koch-Glitsch, LP
Terms of Use | Privacy Policy